Little Dot MK II MK 2 Vacuum Tube Pre-amplifier Headphone Amplifier HiFi Audio AMP 6J1X2 6N6 X2
$169.00
Ex Tax: $169.00
- Stock: 4
- Model: 4000109916852
- Weight: 3.00kg
- Dimensions: 20.00cm x 25.00cm x 30.00cm
- SKU: 4000109916852
Welcome to Queenway Store!
1.Some items parameters produce from AliExpress system, some of them aren't correct, even fully wrong, the detailed description of products should be correct for us.
2.110V and 220V, If you are in 110V area, please tell us.
3.International shipping/transportation cost, it is 2~10 dollars/Kg, many items of our store are very heavy or big volume, it is 65Kg~500Kg, or 0.5~3.0m 3
, the plane shipping fee will be too expensive, the sea shipping is the cheapest and trade safe, but it has no tracking numberm, and need more time(35~70 days)on the process, we must talk about some details deeply if using sea shipping.
4. Some items price wave often, but we try to give the best price to you, because the international shipping is high, we must use a low product price to balance the international shipping fee.
Description
An SEPP (single-ended push pull) OTL circuit operating in Class-A, the Little Dot MK II greatly increases sound quality, dynamic range, output impedance, and harmonic distortion over the celebrated Little Dot II++.
The Little Dot MK II now also provides gain control of 3, 5, and 10 via internal DIP switches for fine-tuning so you can maximize synergy with almost any headphone you have, whether it be 32 ohms or 600!
The Little Dot MK II also gains the driver tube-rolling options from the rest of the MK-series with the ability to roll 6JI, WE403A/B, GE5654, M8100, CV4010, EF95, etc at its factory jumper setting, and with jumper pins shorted, EF92, CV131, and all equivalents and drop-in replacements!
Parameters:
SEPP (Singled-ended Push Pull) OTL in Class-A
Input: Gold-Plated Unbalanced Phono (RCA) Jacks
Output: 1/4" Gold-Plated Stereo Headphone out
Driver Tubes: 6JI
Power Tubes: 6N6
Frequency Response: 20HZ - 50KHz (-1dB)
THD+N: 0.1% (50mW into 300 ohms)
Suitable Headphone Impedance: 32 - 600 ohms
Input Impedance: 50K ohms
Pre-Amplifier Output Impedance: 600 ohms
Pre-Amplifier Gain: 3-10x (also controlled via gain switches)
Pre-Amplifier Voltage: 10V RMS
Weight: 2.5 kg or 5.5 lbs.
Size: 110W*130H*210D mm
