Technical Specifications:

Model: X600.

Working frequency: 50Hz±1%

Rated output power: 600 VA

Overload protection power: 1000 VA

Rated output voltage: AC220 ±0.5%

Rated output current: 2.7A

Output voltage distortion (mains distortion ≤ 5%, resistive load): ≤ 0.1%

Input voltage range: AC 192～252V

Input DC isolation function: —

Boot buffer function: —

No-load power consumption: ≤30W

Cooling system: natural convection radiator

Dimensions (mm): 440(W)×156(H)×363(D)

Net weight: 15Kg

Note:

The value obtained by multiplying the reading of the ammeter on the display panel and the output voltage (220V) is called "apparent power PAV" in electrical engineering;

The actual power consumption of electrical equipment is called "active power PW";

The mutual relationship is: PW = PAV×Cosφ

Cosφ: power factor, φ: phase difference between load current and voltage

When the load is purely resistive, its power consumption (active power) is consistent with the "apparent power". When the load is not purely resistive, the actual power consumption is less than the "apparent power", and the difference depends on the power of the electrical equipment factor.

◆The output power is more pure

The most important "distortion + noise" index to measure the purity of the output voltage of the power supply has been greatly increased by 5 times from <0.5% to <0.1%.

The "distortion + noise" index (THD+N) of the AC voltage indicates the percentage of harmful power harmonics, clutter and noise in the power supply voltage in the total voltage. The lower the value, the purer the power supply. It is used to measure the quality of mains power, and it is also used to measure the purification ability of power supply equipment to AC power.

Compared with the power quality standard of 5% harmonic distortion, which is the upper limit of the national low-voltage power grid, the power output after processing by X600 will be more than 50 times purer than before.

◆The output voltage is more stable.

The output voltage stability index of X600 is improved to 0.5%.

The stability of the power supply voltage is the primary guarantee for the dynamics of audio power equipment, and the addition of X600 will always show positive effects. No matter how much the dynamics of the user audio equipment is compressed due to the power supply, after adding the X600, any deviation and fluctuation of the original line voltage will be eliminated, and the compressed audio dynamics will be restored immediately.

For the comparison of the accuracy and stability of the voltage before and after X600 processing, the digital voltmeter onboard the X600 can also give accurate display respectively.

Stabilizing the voltage is to ensure the dynamics of the audio equipment. The powerful voltage stabilization capability of the X600 is clear at a glance to ensure the dynamic effect of the audio.