- Stock: 50
- Model: 1005003357453760
- Dimensions: 38.00cm x 36.00cm x 16.00cm
- SKU: 1005003357453760
Features:
1.The advanced version adopts loop-free negative feedback full-direct current full-balance discrete class a output circuit, the USB part uses CCHD-957 femtosecond clock, and the analog part uses Mundorf film capacitor to tune; It's a little looser on the vocal, a little more alive..
2.SDA-6 is a high-performance DAC,which adopts XMOS latest xCORE-200 series chip XU208 as the USB Audio scheme, AKM's third generation flagship DAC: AK4499 as the main digital-to-analog conversion chip, AK4118 as the digital Audio input reception chip, using STM32 as the control core, Xilinx's large-scale FPGA as the clock system and digital audio stream processing. PCM supports up to 384 Khz, DSD adopts native direct solution technology, and supports up to DSD512...
3.DAC chip using AKM in 2019 the latest release of AK4499; DSD using native direct solution mode, DSD digital flow without internal digital filter, work in NOS mode, fully in line with the design of HQPlayer.
4.It has a wide range of input and output interfaces, including the standard USB2.0 input interface, SPDIF with BNC coaxial and AES balanced input, HDMI-I2S input interface, analog output including XLR balanced output and RCA single-ended output;and full interface support for DSD input..
5.SDA-6 supports external clock input, where USB supports 10M clock input and other interfaces support WCK input. In USB mode, it also supports 50Ω and 75Ω switchable input impedances.
6.Self-developed adaptive clock system technology, built-in 4 independent ultra-low jitter audio crystal,for the USB part of the configuration of femtosecond-level local clock system, the standard version of the crystal oscillatoris is AS-318B, the advanced version of the crystal oscillatoris is CCHD-957.
7.High performance digital-analog Hybrid PLL(Phase-Locked Loop), excellent clock synchronization recovery technology,
can greatly filter external digital input Jitter Secondary PLL;
8.It adopts 4-way full-balanced full-direct current Class A discrete circuit output, in which the advanced version adopts loop-free negative feedback output;
9.Large FPGA digital audio signal processing, self-developed second-generation algorithm, the original multi-input channel isolation technology,
to ensure the purity of each input signal.
10.Built-in 40W custom type O transformer,outputs 4 independent power supply windings, up to 20 distributed voltage stabilizing lines; the reference power supply for AK4499 is a newly developed super low noise (as low as 0.5 uV RMS) power supply system.
Technical indicators:
Sample rate supported by each input interface:
PCM:44.1KHz,48KHz,88.2KHz,96KHz,176.4KHz,
192KHz,352.8KHz,384KHz
[Where USB and I2S support full sampling rate, S/PDIF maximum support 192 KHZ]
DSD:2.8 MHz (DSD64) - DoP,native
5.6 MHz (DSD128) - DoP,native
11.2 MHz (DSD256) - DoP,native
22.5792 MHz (DSD512) - native
[Where USB and I2S support all DSD formats, S/PDIF and AES/EBU support DSD64 DOP mode]
Bit Width: Up to 32 bit over USB and I2S
Maximum 24 bit over S/PDIF
Electrical standards for each interface:
1, The USB input socket is a standard USB-B female socket, the USB power supply range is 4.5V-5.1V;
2, SPDIF interface input standard S/PDIF signal, input impedance is 75Ω, AES input impedance is 110Ω;
3, the power input is 115V/230V AC, internal use of 40W custom-built transformer for power supply;
4, I2S input is HDMI interface LVDS level,compatible with most front-end devices;
Analog output performance:
Output Level (0dBFS) :
PCM: RCA single-ended output is 2.25V RMS, XLR balanced output is 4.5V RMS
DSD: RCA single-ended output is 1.8V RMS, XLR balanced output is 3.6V RMS
Output impedance: 22Ω (RCA single-ended)/45Ω (XLR balance)
Frequency Response: 20-20Khz +/-0.1db
SNR: 131db (20-22kHz)
Distortion characteristics:THD+N (1Khz, 0 dBFS)0.00012% (- 118 DB) at fs = 44.1 Khz (PCM, 20HZ-22KHZ)
Dynamic Response (1Khz,-60 dBFS) 131 dB (20HZ-22KHZ)
Left-right channel separation>130dB@1kHz
Package size and packing:
Length, width and height of the product: 262MM * 220mm * 46MM, It doesn't include the height of the foot and the protruding part of the connector at the back of the product.
Gross weight: about 2.7KG
Length, width and height of the carton packing: 330MM * 310MM * 110MM.
Packing weight: 3.6KG