ES9038 core voltage adopts three-stage filtering to ensure that the sound is pure and noise-free from the source. The analog part adopts a fully symmetrical Class A voltage regulator structure. 8 ultra-low noise LDOs make the intermediate frequency thick and accurate, high frequency transparent, elegant, and deep Wide sound field and excellent analysis, both low-frequency volume and texture are emphasized.
Brand new user interface, intuitive and concise, advanced settings bring more gameplay, 11 filter settings, 5-level volume stepping, de-jitter switch, de-emphasis switch, etc.
The firmware upgrade interface, regularly updates the firmware based on community feedback, and together make this decoding easier to use.
Use low jitter constant temperature crystal oscillator.
2.8 inch 240*400 full viewing angle TFT LCD screen, all settings are clear at a glance.
Power-down memory, save the last setting (under normal power-off condition).
Add 3 independent shortcut buttons.
Added infrared remote control function to make the operation more convenient.
ALPS imported digital volume potentiometer, step accuracy can be set to 0.5dB/step.
USB uses HU308 XMOS chip U208 core third-generation chip, with more stable transmission and stronger performance.
FPGA built-in digital signal reforming technology, clock management and multi-level digital shaping technology.
BNC supports external high-precision 10Mhz clock input..
Full interface supports DSD hard solution:.
USB support sampling rate: PCM32bit 384K DSD DSD64, DSD128, DSD256.
Coaxial support sampling rate: PCM 32bit 384K DSD Dop64, Dop128
BNC supports sampling rate: PCM 32bit 384K DSD Dop64, Dop128
AES supports sampling rate: PCM 32bit 384K DSD Dop64, Dop128
Fiber Support sampling rate: PCM 32bit 192K DSD Dop64
I2S/DSD input supports PCM 32bit 384K DSD64~DSD512 (current UI display limitation)
Machine size: width 300 * depth 200 * height 52MM (not including protruding parts);
Packing size: length 470*width 360*height 175MM;
Weight with packaging: 3KG;
Voltage: AC230V or AC115;
Frequency response: 20Hz-20kHz
Line output: RCA output level single-ended 2.0 Vrms @0dBFS, balanced 6.0 Vrms @0dBFS
The apple remote control can be used directly without pairing. If the keys cannot be used normally, please press the two keys in the red circle of the remote control in the figure below for about 6 seconds to switch the remote control mode. There are many apple remote modes, and you can switch the remote control mode multiple times until the keys are used normally
Description of the remote control keys: the left and right keys are for input switching; the up and down keys are for volume; the confirm key is for mute; the play pause key is for power on and off; MEUE is for the menu key
The HDMI (I2S/DSD) interface is defined as follows: